433.92-868.35 MHz fixed trinary code transmitter.
The transmitter KUMA is designed for use in garage doors with non-continuous operation. It can be used without restriction in all European Union member states.
Kuma
- Transmission to fixed trinary code
- Available in 433.92 MHz and 868.35 MHz version
- 2 and 3 buttons version
- Available in 20-unit packs
MORE INFORMATION ABOUT THIS PRODUCT
Rapid guide KUMA 155.00 KB
Luna
433.92-868.35 MHz fixed trinary code transmitter.
The transmitter LUNA is designed for use in garage doors with non-continuous operation. It can be used without restriction in all European Union member states.
- Transmission to fixed trinary code
- Available in 433.92 MHz and 868.35 MHz version
- 2 and 3 buttons version
- Available in 20-unit packs
MORE INFORMATION ABOUT THIS PRODUCT
Iris
433.92-868.35 MHz rolling code transmitter.
The transmitter IRIS is designed for use in garage doors with non-continuous operation. It can be used without restriction in all European Union Member States.
- Transmission to rolling code
- Available in 433.92 MHz and 868.35 MHz version
- 2 and 4 buttons version
- Serialised at source
- Programmable via cable using IRPROGM manual console or IRTAGPROG computer
- Possibility of programming, via IRPROGM or IRTAGPROG, replacement transmitters to replace transmitters previously memorised in the installation
- Available in 20-unit packs
MORE INFORMATION ABOUT THIS PRODUCT
Lira
433.92 MHz rolling code transmitter.
- Transmission to rolling code
- Available in 433.92 MHz version
- 2 buttons version
- Serialised at source
- Available in 20-unit packs
MORE INFORMATION ABOUT THIS PRODUCT
Vega
Radio receivers and transmitters.
- The VEGA plug-in radio receiver is designed to receive and decode the radio transmitter signals used in motorised door facilities. 2 and 4 channel transmitters, 433 and 868 MHz
- This receiver works at 433.92 MHz (VERE1) or 868.35 MHz (VERE1/868) and is valid for the VEGA transmitters of the same frequency
MORE INFORMATION ABOUT THIS PRODUCT
RSD
Plug-in receiver without decoder.
- The RSD receiver is designed to receive the radio emitter signals used in motorised door facilities
- This receiver works at 433.92 MHz (RSD-433 model) or 868.35 MHz (RSD-868 model) and is valid for different emitters, depending on the type of decoding used in the receiver or control panel
- In order for this receiver to work, it must be inserted in the radio connector (R.E.) of a receiver or control panel fitted with a decoder and memory to programme the emitter code or codes
MORE INFORMATION ABOUT THIS PRODUCT
IRRE2
The IRRE2 plug-in radio receiver is designed to receive and decode the radio transmitter signals used in motorised door facilities.
- Operation with transmitters to fixed trinary code
- 2 programmable channels with monostable operating logic
- Community fixed trinary 433.92 code management to establish the number of bits to be stored by the receiver
MORE INFORMATION ABOUT THIS PRODUCT
LRRE1
433.92 MHz rolling code receiver.
The LRRE1 plug-in radio receiver is designed to receive and decode the radio transmitter signals used in motorised door facilities.
- Operation with rolling code transmitters
- 1 programmable channel with monostable operating logic
- Memory full signage
- Self-learning management of radio transmitters
- Replacement transmitter management
- Possibility of memorizing 30 different codes in self-learning
MORE INFORMATION ABOUT THIS PRODUCT
IRRE2-250
433.92-868.35 MHz fixed code and rolling code receiver.
The IRRE2-250 plug-in radio receiver is designed to receive and decode the radio transmitter signals used in motorised door facilities
- Operation with fixed trinary code or rolling code transmitters
- 2 programmable channels with monostable operation logic
- Community management to establish the number of bits to be stored by the receiver (fixed code)
- Sequential memorizing of the transmitters (rolling code)
- Memory full signage (rolling code)
- Self-learning management of radio transmitters (rolling code)
- Replacement transmitter management (rolling code)
- Possibility of memorizing 250 different codes in self-learning (expandable up to 1000 codes with the MEMO1000 interchangeable memory)
- Basic programming via receiver or advanced programming via IRPROGM programmer and IRTAGPROG programmer/software
MORE INFORMATION ABOUT THIS PRODUCT
IRIN2S-250
433.92-868.35 MHz fixed code and rolling code receiver.
The IRIN2S-250 independent radio receiver is designed to receive and decode the radio transmitter signals used in motorised door facilities
- Operation with fixed trinary code or rolling code transmitters
- Receiver with RSD radio module with connector that allows modification of the working frequency
- 2 programmable channels with monostable, bistable or timed operating logic
- Community management to establish the number of bits to be stored by the receiver (fixed code)
- Sequential memorizing of the transmitters (rolling code)
- Memory full signage (rolling code)
- Self-learning management of radio transmitters (rolling code)
- Replacement transmitter management (rolling code)
- Possibility of memorizing 250 different codes in self-learning (expandable up to 1000 codes with interchangeable memory)
- Basic programming via receiver or advanced programming via IRPROGM programmer and IRTAGPROG programmer/software
MORE INFORMATION ABOUT THIS PRODUCT
IRIN4B-250
433.92-868.35 MHz fixed code and rolling code receiver.
The IRIN4B-250 independent radio receiver is designed to receive and decode the radio transmitter signals used in motorised door facilities
- Operation with fixed trinary code or rolling code transmitters
- Receiver with RSD radio module with connector that allows modification of the working frequency
- 4 programmable channels with monostable, bistable or timed operating logic
- Community management to establish the number of bits to be stored by the receiver (fixed code)
- Connection for magnetic key readers
- Sequential memorizing of the transmitters (rolling code)
- Memory full signage (rolling code)
- Self-learning management of radio transmitters (rolling code)
- Replacement transmitter management (rolling code)
- Possibility of memorizing 250 different codes in self-learning (expandable up to 1000 codes with interchangeable memory)
- Basic programming via receiver or advanced programming via IRPROGM programmer and IRTAGPROG programmer/software
MORE INFORMATION ABOUT THIS PRODUCT
TAGBASE-250
Interface relay for plug-in receiver power supply 230 Vac or 12-24Vac/Vdc.
- Enables the use of a plug-in receiver in installations not equipped with radio connector-connection via cable
- 2 programmable channels with monostable, bistable or timed operating logic
- Connection for TAG key readers (max. 2 readers)
- Sequential memorizing of keys/cards (TAG)
- Memory full signage (TAG)
- Possibility of memorizing 250 different key/TAG card codes in self-learning (expandable up to 1000 codes with interchangeable memory)
- Basic programming via receiver or advanced programming via IRTAGPROG programmer/software
MORE INFORMATION ABOUT THIS PRODUCT
IRPROGM
Portable programming device with rolling code system.
- Possibility of programming memories and rolling code transmitters
- Allows you to change the assigned code to a rolling code transmitter, and pre-assign the codes in the memory to be programmed according to the requirements
- Allows you to quickly enable a new user thanks to the possibility of automatically generating a series of correlative codes and downloading them to the receiver
- To enable a new user, you just need to program a programmable transmitter with one of the already-existing codes in the memory
- Allows you to generate a substitute transmitter that has been previously memorised in a receiver
MORE INFORMATION ABOUT THIS PRODUCT
Technical Manual
Rapid guide IRPROGM 132.84 KB
IRTAGPROG
PC terminal with software for installations management with rolling code and TAG systems.
- Possibility of programming memories, keys, TAG cards and rolling code transmitters
- Allows the sorted filing of the installations made on the PC
- Allows the printing of all the information about users, transmitters, receivers and installations
- Allows you to change the assigned code to a key, TAG card or rolling code transmitter, and pre-assign the codes in the memory to be programmed according to the requirements
- Allows you to quickly enable a new user thanks to the possibility of automatically generating a series of correlative codes and downloading them to the receiver
- To enable a new user, you just need to program a programmable transmitter with one of the already-existing codes in the memory
- Allows you to generate a substitute transmitter that has been previously memorised in a receiver
MORE INFORMATION ABOUT THIS PRODUCT
MEMO1000
1000-code memory expansion.
1000-code memory compatible with rolling code and TAG systems.
KRAET
Outdoor antenna with protective over for receivers with 4m long RG-58 cable.
- The KRAET antenna is designed to receive radio signals from the transmitters used in motorised door installations
- It comprises the antenna itself (rod), a metal bracket and a screened cable with a connector
MORE INFORMATION ABOUT THIS PRODUCT
Technical Manual
Rapid guide KRAET 88.38 KB
RSCAN
Frequency detector
- Shows the occurrences of interfering signals and their intensity within their respective frequency band on a LED display
- Allows you to find and try to eliminate possible interference before installing a radio system
- Helps you to find the optimal position of the receivers
No olvide que para un correcto uso de su puerta y una larga vida del automatismo es necesario un mantenimiento.
Además de garantizar que tengan las seguridades en regla.